ข้อมูลประกอบการเลือกซื้อ
ข้อมูลสำคัญและสิ่งที่ควรเช็ก
วันที่บันทึกข้อมูลใน DeeTook:
วันที่นี้เป็นวันที่แก้ไขระเบียนในเว็บ ไม่ยืนยันว่าราคาและสต็อก Shopee สดถึงวันนั้น ราคาที่แสดงมาจากฟีดที่นำเข้า โปรดตรวจราคาของตัวเลือก ค่าจัดส่ง และสถานะสินค้าบน Shopee ก่อนซื้อ
ส่วนนี้จัดข้อมูลจากชื่อสินค้าและรายละเอียดในฟีดให้อ่านง่าย ไม่ใช่ผลทดสอบใช้งาน ข้อความอาจกล่าวถึงหลายรุ่นหรือหลายตัวเลือก โปรดเทียบกับตัวเลือกที่ต้องการซื้อ
ยังไม่พบสเปกที่ระบุชัดเจนพอจะแยกเป็นตาราง อ่านรายละเอียดด้านล่างหรือสอบถามร้านก่อนซื้อ
ช่วยเลือก อุปกรณ์และเครื่องใช้ไฟฟ้า
- เทียบรุ่น หัวต่อ และข้อกำหนดการใช้งานกับอุปกรณ์ที่มีอยู่
- ตรวจสอบแหล่งจ่ายไฟ อุปกรณ์ในกล่อง และสิ่งที่ต้องซื้อเพิ่ม
- ถามร้านถึงเงื่อนไขประกัน ผู้รับประกัน และช่องทางบริการของรุ่นนั้น
ข้อมูลที่ยังควรถามร้าน
ยังแยกข้อมูล รุ่น / ขนาด / วัสดุ / จำนวน ไม่ได้ชัดเจนจากข้อความที่มี อาจมีอยู่ในรูปหรือรายละเอียดบนหน้าร้าน
- ราคานี้ครอบคลุมตัวเลือกและจำนวนใด
- ค่าจัดส่งและวันจัดส่งสำหรับพื้นที่ของคุณ
- เงื่อนไขรับประกัน เปลี่ยน หรือคืนสินค้าของรายการนี้
เลือกดูข้อมูลต่อให้ตรงความต้องการ
ต้องการดูตัวเลือกอื่น เริ่มจาก สินค้าในหมวด มือถือและอุปกรณ์ หรือ สินค้าที่ไม่ระบุแบรนด์ เพื่ออ่านข้อมูลแต่ละรายการก่อนเปรียบเทียบ
หากต้องการดูรายการจากผู้ขายเดียวกัน เปิด สินค้าจาก FPV RACING RC แล้วตรวจสอบเงื่อนไขของสินค้าแต่ละชิ้น
คะแนนและจำนวนรีวิวที่แสดงเป็นข้อมูลจาก Shopee ส่วน +1 ถูกใจเป็นการโหวตใน DeeTook ไม่ใช่คะแนนจากผู้ซื้อที่ยืนยันการสั่งซื้อ
อ่าน ที่มาของข้อมูลสินค้าและการเรียงรายการใน DeeTook เพื่อเข้าใจวันที่อัปเดต ราคา และคะแนนที่แสดง
สรุปข้อมูลที่มี: หมวด มือถือและอุปกรณ์ · ราคาตามข้อมูล ฿403.00 · ขายแล้ว 1 ชิ้นตามข้อมูลสินค้า · บันทึกใน DeeTook 05/10/2026 รายละเอียดรุ่นและเงื่อนไขให้ตรวจสอบกับร้านอีกครั้ง
Specification
- Item: Pavo Series COB LED Strip
- Color: Ice Blue, White, Green, Red
- Length: 560mm
- Width: 4mm
- Supply Voltage: 5V
- Current: 450mA~600mA
- Control Signal: High and Low Logic Levels
- Applicable Drone: Pavo Pico, Pavo20, Meteor85
Configuration
- Connect the flight controller to the Betaflight configuration and switch to the CLI configuration interface.
- Enter the RESOURCE in the CLI configuration interface and press ENTER to export the port pin configuration definition of the flight control.
- Select the available port on the flight controller as the control port to control the COB LED Strip. The following takes the TX1 port of the UART1 port as an example to configure the PINIO function of the flight controller:
resource SERIAL_TX 1 NONE
//Turn off the serial port function of the TX1 pin
resource PINIO 1 A09
//Configure the TX1 pin (i.e. A09 pin) as the No. 2 PINIO function
set pinio_box = 40,255,255,255
//Set PINIO function range
save
//Save configuration
Configure the PINIO function mapping relationship between the radio controller and the flight controller. In Betaflight Configuration, map the PINIO function No. 1 (USER1 in the picture below) to the AUX3 channel of the radio controller (or other channels are acceptable).
Note: The appearance of the Ice Blue COB LED Strip is light yellow, while the Green strip is white, and the white strip is yellow.
Package
- 1 * Pavo Series COB LED Strip(Ice Blue/White/Green/Red)
- 1 * Anti-static Bag