Oxebar 20L Amber PET Keg & Pressure Fermenter Tank

Fit up to 3 of these badboys in your Series X.1, X or 4.1 (aka XL).
Or fit up to 6 of these in a Series X.1 Plus!
Not only will it protect your beer from damaging light (amber tinting) it will also keep your beverages fresher for up to 3 times as long due to the Mono Barrier PET Polymer Matrix.
It also comes with a floating dip tube with cage filter. Is easy to undo and stack on top of each-other upside down with disconnects attached.
The 20L Oxebar Amber PET Kegs come with a Green Pressure Relief valve rated to 65psi.
Dimensions:
640mm High
235mm Diameter
Other uses:
- Overflow Homebrew Keg
- Cleaning Keg for Commercial Keg Buyers
- In a pinch it could be used as a Pressure Fermenter Tank, although we would highly recommend going for a KB03625 30L FermZilla Pressure Brewing Kit for adequate single batch sizing as well as being able to get your hand inside to clean properly.
20L Brimful, ideally 19.5L fill for Kegging purposes.
If you are going to use it as a fermenter, we would recommend between 15L and 18L.
When fermenting you will need a spunding valve. We would recommend the BlowTie.
KL09706 BlowTie Spunding Valve Kit OR KB03529 Integrated Gauge BlowTie Kit (0-15psi)
Remember, a PRV is a not a spunding valve.
Includes:
1 x 20L Amber Mono Barrier PET Oxebar Keg
1 x Dual PCO1881 Lid assembly with Oxebar Black Handle
1 x KL09164 Green Pressure Relief Valve for Keg Lids / MK4 Reg - 65psi
1 x KL17060 100cm Silicone Hosing with Stainless Steel float and Hop Filter Cage
1 x KL10788 RED Multi Gas Post Plastic Carbonation Cap
1 x KL10788-Yellow Multi Liquid Post Plastic Carbonation Cap